Showroom bulun
  • Showroomları

Not Defterim

You have not assigned any products.

Once you have added products to your notepad you can download your list right here.

0 Product(s)
Download as PDF
Delete all

The Product is already stored on your notepad.

Lavabo bataryasının kartuşunu değiştirmek

Kurulum rehberini adım adım takip edebilir veya videodan destek alabilirsiniz.


Bataryaya zarar vermemek için öncelikle su şebekesinin tüm kirliliklerden arındırılması gerekir.

Bataryanın kartuşunu değiştirmeden önce her iki su kaynağını da kapatın ve basıncı ve artık suyu boşaltmak için suyu açın.

Accessing the cartridge

1 - Using a flat-head screwdriver, remove the plastic cover, then remove the screw with a 3 mm Allen key.

2 - Dismantle the lever by pulling upwards, then remove the cap.

3 - Unscrew the nut with a large, 32 mm socket wrench and pull the cartridge firmly towards yourself. If necessary, replace the lever to make this easier.

4 - Make sure there are no seals or foreign objects in the mixer body.

5 - Then install the new cartridge into the mixer body, positioning the two tabs on the cartridge into place.

6 - Screw the large nut back with moderate pressure using the 32 mm socket wrench. Replace the cap.

7 - Replace the lever and tighten the screw with the hex key.Finally refit the plastic cover.

Turning on water

1 - Open the hot and cold water supplies

2 - Make sure the mixer is operating properly.

Congratulations, you have finished installing your new GROHE product. Check our other installation guides and discover all of our products on